ENCLOSURE ACCESSORIES

ENCLOSURE WIRING PARTS

To enable installers to populate their own panels, we also supply a large range of wiring accessories including RCBO's, isolators, cabling and labelling kits.

These are the same high quality, branded components that we use to pre wire and fully wire out DIN Rail Enclosures in house.

See our Enclosures for details on all of our DIN Rail Enclosures.

  • High Quality, Branded Components
  • Cost Saving Over Sourcing Components Individually
  • Available From Stock
CATEGORY PRODUCT DESCRIPTION
FILTER
BREAKERS 335-1001 RCBO TYPE C 10A
ISOLATORS 335-2002 ISOLATOR SWITCH 2 POLE 63A (SINGLE)
ISOLATORS 335-2102 ISOLATOR SWITCH 4 POLE 63A (SINGLE)
CABLE 444-1125 TRI RATED CABLE 2.5MM (100M ROLL) - BLACK
CABLE 444-2125 TRI RATED CABLE 2.5MM (100M ROLL) - BLUE
CABLE 444-3125 TRI RATED CABLE 2.5MM (100M ROLL) - BROWN
CABLE 444-7125 TRI RATED CABLE 2.5MM (100M ROLL) - WHITE
CONNECTORS 777-1201 2.5MM BOOTLACE FERRULE CRIMP (GREY) (PACK OF 500)
TERMINAL BLOCKS 778-3001 TERMINAL END STOP (CLAMP) (PACK OF 2)
TERMINAL BARS 778-3005 TERMINAL BAR 26 HOLES (EARTH)
TERMINAL BARS 778-3006 TERMINAL BAR 20 HOLES (NEUTRAL)
TERMINAL BLOCKS 778-3010 DIN TERMINAL BLOCK 4MM (PACK OF 20) - EARTH
TERMINAL BLOCKS 778-3114 DIN TERMINAL BLOCK 4MM (PACK OF 50) - BROWN
TERMINAL BLOCKS 778-3214 DIN TERMINAL BLOCK 4MM (PACK OF 50) - BLUE
TERMINAL BLOCKS 778-3314 DIN TERMINAL BLOCK 4MM (PACK OF 50) - BLACK
TERMINAL BLOCKS 778-3714 DIN TERMINAL BLOCK 4MM (PACK OF 50) - RED
TERMINAL BLOCKS 778-3814 DIN TERMINAL BLOCK 4MM (PACK OF 50) - WHITE
CONNECTORS 778-4405 4 WAY ORANGE TERMINAL LINK (PACK OF 50)
TERMINAL BLOCKS 778-9411 GREY TERMINAL END CAPS (PACK OF 20)
MARKERS 900-2001 IDENT PUSH IN MARKER SHEET 1
MARKERS 900-2002 IDENT PUSH IN MARKER SHEET 2
MARKERS 900-2003 IDENT PUSH IN MARKER SHEET 3
ADAPTERS AP-DIN DIN RAIL ADAPTER PLATE

The AP-DIN is an adapter plate, designed to allow mounting of products which do not support DIN rail, within an LCP or other DIN rail enclosure. Popular examples of products that would require this product for mounting include Lutron I/O and DMX modules.

KIT CONTAINS:
  • 1 x Adapter Plate
  • 2 x DIN Rail Adapters
  • Fasteners

MORE INFO
ADAPTERS AP-DIN-IO DIN Rail Adapter Plate for Lutron QSE-IO Logic controller

The AP-DIN-IO lets you mount Lutron’s QSE-IO Logic controller onto a DIN rail. The included landing board gives you extra COM ports and low voltage DC power so you can logically lay out and wire your remote sensors (eg. PIR or Daylight Sensor). Individual pluggable connectors help you quickly debug during deployment and enables the use of third-party sensors. The landing board is integrated into a recess on the AP-DIN-IO to fit neatly underneath our enclosure lids without the need for additional trim plates.

KIT CONTAINS:
  • 1 x Adapter Plate
  • 1 x Landing Board
  • 2 x DIN Rail Adapters
  • Fasteners

MORE INFO
BLANKS C4E-BP C4E-BP DIN Rail Blanking Plate

The blanking plate is designed to block off one complete DIN module cut out on the front cover of an C4E enclosure. Perfect for when extra space has been specified for future expansion, the blanking plate secures from the rear ensuring a secure finish. The simple design allows for retrofit to any C4E unit without the need for extra holes.
MORE INFO
TERMINAL BLOCKS C4E-TB20 20 DIN RAIL TERMINAL BLOCKS & END RESTRAINTS

Pack of 20 terminal blocks for use with C4E enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 10 x Blue Terminal Blocks
  • 10 x Brown Terminal Blocks
  • 2 x End Stops
  • 6 x 4 Pole Jumper Bars

MORE INFO
TERMINAL BLOCKS C4E-TB20-USA US STYLE 20 DIN RAIL TERMINAL BLOCKS & END RESTRAINTS

Pack of 20 terminal blocks for use with C4E enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 10 x White Terminal Blocks
  • 10 x Black Terminal Blocks
  • 2 x End Stops
  • 6 x 4 Pole Jumper Bars

MORE INFO
TERMINAL BLOCKS C4E-TB24 24 DIN RAIL TERMINAL BLOCKS & END RESTRAINTS

Pack of 24 terminal blocks for use with C4E enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 12 x Blue Terminal Blocks
  • 12 x Brown Terminal Blocks
  • 2 x End Stops
  • 9 x 4 Pole Jumper Bars

MORE INFO
TERMINAL BLOCKS C4E-TB24-USA US STYLE 24 DIN RAIL TERMINAL BLOCKS & END RESTRAINTS

Pack of 24 terminal blocks for use with C4E enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 12 x Black Terminal Blocks
  • 12 x White Terminal Blocks
  • 2 x End Stops
  • 9 x 4 Pole Jumper Bars

MORE INFO
SPARES DEB-DRK DEB DIN RAIL KIT

The DEB DIN Rail Add-On Kit allows the mounting of DIN compatible modules alongside networking equipment inside a DEB enclosure. Neatly manage wiring using the included cable trunking that is pre-cut to span the width of the enclosure. The versatile layout of the DEB allows the installation of multiple DEB-DRK kits inside each enclosure, creating the ideal enclosure to suit any project.

KIT CONTAINS:
  • 1 x Purpose Cut Length of DIN Rail
  • 1 x Purpose Cut Length of Cable Trunking
  • Mounting Brackets & Hardware

MORE INFO
ADAPTERS EE-MMK ELECTRICAL ENCLOSURE MODULE MOUNT KIT

A mounting kit to allow simple and easy mounting of surface mounted modules onto DIN rail within Future Automation electrical enclosures. Suitable for most modules including Lutron Processors, DMX and I/O modules.

KIT CONTAINS:
  • 2 x Rail Adapters
  • 2 x Washers
  • 2 x Fixing Screws

MORE INFO
SPARES ENCLOSURE-HINGE-PINS REPLACEMENT ENCLOSURE HINGE PINS (PAIR)
SPARES ENCLOSURE-HINGE-SET REPLACEMENT ENCLOSURE HINGE SET (PAIR)
SPARES ENCLOSURE-LID-SCREWS ENCLOSURE LID SCREWS X 50
BLANKS LCP-BP LCP DIN Rail Blanking Plate

The blanking plate is designed to block off one complete full length DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra rails have been specified for future expansion, the blanking plate secures from the rear ensuring a secure finish.
MORE INFO
BLANKS LCP-DRB LCP DIN RAIL BLANK (3 PACK)

Used to block individual sections of DIN rail, each blank is equivalent to one 1 DIN wide, attached directly to the DIN rail and protrudes through the front cover cut out to completely blank excess lengths of rail when the cover is in place.
MORE INFO
LANDING BOARDS LCP-LB5 Landing Board for 5 Connectors

The LCP-LB5 5 way landing board is a printed circuit board designed to allow the installer to terminate module connections inside an LCP enclosure, to simplify wiring. The landing board attaches to the inside of the LCP panel, using dedicated fixing points.
MORE INFO
TRIM PLATES LCP-MTP1 Module Trim Plate - 9 DIN Cutout

The module trim plate is designed to block off partial lengths of DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra space has been specified for future expansion or when a rail is not fully used, the blanking plate attaches from the rear ensuring a secure finish.

LCP-MTP1 - Module Trim Plate - 9 DIN / 166mm (6.53") Cutout
MORE INFO
TRIM PLATES LCP-MTP2 Module Trim Plate - 12 DIN Cutout

The module trim plate is designed to block off partial lengths of DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra space has been specified for future expansion or when a rail is not fully used, the blanking plate attaches from the rear ensuring a secure finish.

LCP-MTP2 - Module Trim Plate - 12 DIN / 220MM (8.66") Cutout
MORE INFO
TRIM PLATES LCP-MTP3 Module Trim Plate - 18 DIN Cutout

The module trim plate is designed to block off partial lengths of DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra space has been specified for future expansion or when a rail is not fully used, the blanking plate attaches from the rear ensuring a secure finish.

LCP-MTP3 - Module Trim Plate - 18 DIN / 328MM (12.91") Cutout
MORE INFO
TRIM PLATES LCP-MTP4 Module Trim Plate - 21 DIN Cutout

The module trim plate is designed to block off partial lengths of DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra space has been specified for future expansion or when a rail is not fully used, the blanking plate attaches from the rear ensuring a secure finish.

LCP-MTP4 - Module Trim Plate - 21 DIN / 382MM (15.03") Cutout
MORE INFO
BLANKS LCP-PD-BP LCP-PD DIN Rail Blanking Plate

The blanking plate is designed to block off one complete full length DIN rail cut out on the front cover of an LCP-PD enclosure. Perfect for when extra rails have been specified for future expansion, the blanking plate secures from the rear ensuring a secure finish. The simple design allows for retrofit to any LCP-PD unit without the need for extra holes.
MORE INFO
TERMINAL BLOCKS LCP-TB10 10 DIN Rail Terminal Blocks & End Restraints

Pack of 10 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 5 x Blue Terminal Blocks
  • 5 x Brown Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars

MORE INFO
TERMINAL BLOCKS LCP-TB10-USA 10 DIN Rail Terminal Blocks & End Restraints

Pack of 10 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 5 x Black Terminal Blocks
  • 5 x White Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars

MORE INFO
TERMINAL BLOCKS LCP-TB16 16 DIN Rail Terminal Blocks & End Restraints

Pack of 16 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 8 x Blue Terminal Blocks
  • 8 x Brown Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars

MORE INFO
TERMINAL BLOCKS LCP-TB16-PH2 Phase 2 - 16 DIN Rail Terminal Blocks & End Restraints

Pack of 16 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 8 x Blue Terminal Blocks
  • 8 x Black Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars

MORE INFO
TERMINAL BLOCKS LCP-TB16-PH3 Phase 3 - 16 DIN Rail Terminal Blocks & End Restraints

Pack of 16 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 8 x Blue Terminal Blocks
  • 8 x White Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars

MORE INFO
TERMINAL BLOCKS LCP-TB16-USA US Style 16 DIN Rail Terminal Blocks & End Restraints

Pack of 16 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 8 x White Terminal Blocks
  • 8 x Black Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars

MORE INFO
TERMINAL BLOCKS LCP-TB8 8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x Blue Terminal Blocks
  • 4 x Brown Terminal Blocks
  • 2 x End Stops
  • 2 x 4 Pole Jumper Bars

MORE INFO
TERMINAL BLOCKS LCP-TB8-0-10V 0-10V - 8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

Ideal for use with 0-10V control signals or audio speaker connections

KIT CONTAINS:
  • 4 x Red Terminal Blocks
  • 4 x Black Terminal Blocks
  • 2 x End Stops
  • 1 x 4 Pole Jumper Bar

MORE INFO
TERMINAL BLOCKS LCP-TB8-PH2 Phase 2 - 8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x Blue Terminal Blocks
  • 4 x Black Terminal Blocks
  • 2 x End Stops
  • 2 x 4 Pole Jumper Bars

MORE INFO
TERMINAL BLOCKS LCP-TB8-PH3 Phase 3 - 8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x Blue Terminal Blocks
  • 4 x White Terminal Blocks
  • 2 x End Stops
  • 2 x 4 Pole Jumper Bars

MORE INFO
TERMINAL BLOCKS LCP-TB8-USA US Style 8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x White Terminal Blocks
  • 4 x Black Terminal Blocks
  • 2 x End Stops
  • 2 x 4 Pole Jumper Bars

MORE INFO
TERMINAL BLOCKS LCP-TB-DALI TERMINAL BLOCKS FOR 1 DALI MODULE

Pack of 8 terminal blocks for use with LCP enclosures when installing a DALI module. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 2 x Grey Terminal Blocks
  • 2 x Black Terminal Blocks
  • 2 x Brown Terminal Blocks
  • 2 x Blue Terminal Blocks
  • 2 x End Stops
  • 2 x 2 Pole Jumper Bars

MORE INFO
TERMINAL BLOCKS LCP-TB-MOTOR TERMINAL BLOCKS FOR 1 MOTOR MODULE

Pack of 8 terminal blocks for use with LCP enclosures when installing a DALI module. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x Brown Terminal Blocks
  • 4 x Red Terminal Blocks
  • 4 x Blue Terminal Blocks
  • 2 x End Stops
  • 1 x 4 Pole Jumper Bars

MORE INFO
TRIM PLATES LXN-MTP157 Module Trim Plate - 157mm Cutout
MORE INFO
TRIM PLATES LXN-MTP228 Module Trim Plate - 228mm Cutout
MORE INFO
TRIM PLATES LXN-MTP319 Module Trim Plate - 319mm Cutout
MORE INFO
TRIM PLATES LXN-MTP371 Module Trim Plate - 371mm Cutout
MORE INFO
WIRING KITS RCBO-CK RCBO Connection Kit (for up to 15 RCBOs)
WIRING KITS SWKIT-LCP4 Self Wiring Kit for LCP4

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP4
MORE INFO
WIRING KITS SWKIT-LCP5 Self Wiring Kit for LCP5

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP5
MORE INFO
WIRING KITS SWKIT-LCP6 Self Wiring Kit for LCP6

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP6
MORE INFO
WIRING KITS SWKIT-LCP7 Self Wiring Kit for LCP7

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP7
MORE INFO
WIRING KITS SWKIT-LCP8 Self Wiring Kit for LCP8

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP8
MORE INFO
BACKBOXES USJBS BACKBOX FOR 1 GANG US KEYPAD (10 PACK)

The USJBS is a 1 gang backbox that has been designed to allow the installation of US style keypads within a brick wall. Shallower than a traditional US style backbox, the USJBS allows for an easier installation with less space required within the wall.
MORE INFO
PRODUCT CODE 335-1001
DESCRIPTION RCBO TYPE C 10A
PRODUCT CODE 335-2002
DESCRIPTION ISOLATOR SWITCH 2 POLE 63A (SINGLE)
PRODUCT CODE 335-2102
DESCRIPTION ISOLATOR SWITCH 4 POLE 63A (SINGLE)
PRODUCT CODE 444-1125
DESCRIPTION TRI RATED CABLE 2.5MM (100M ROLL) - BLACK
PRODUCT CODE 444-2125
DESCRIPTION TRI RATED CABLE 2.5MM (100M ROLL) - BLUE
PRODUCT CODE 444-3125
DESCRIPTION TRI RATED CABLE 2.5MM (100M ROLL) - BROWN
PRODUCT CODE 444-7125
DESCRIPTION TRI RATED CABLE 2.5MM (100M ROLL) - WHITE
PRODUCT CODE 777-1201
DESCRIPTION 2.5MM BOOTLACE FERRULE CRIMP (GREY) (PACK OF 500)
PRODUCT CODE 778-3001
DESCRIPTION TERMINAL END STOP (CLAMP) (PACK OF 2)
PRODUCT CODE 778-3005
DESCRIPTION TERMINAL BAR 26 HOLES (EARTH)
PRODUCT CODE 778-3006
DESCRIPTION TERMINAL BAR 20 HOLES (NEUTRAL)
PRODUCT CODE 778-3010
DESCRIPTION DIN TERMINAL BLOCK 4MM (PACK OF 20) - EARTH
PRODUCT CODE 778-3114
DESCRIPTION DIN TERMINAL BLOCK 4MM (PACK OF 50) - BROWN
PRODUCT CODE 778-3214
DESCRIPTION DIN TERMINAL BLOCK 4MM (PACK OF 50) - BLUE
PRODUCT CODE 778-3314
DESCRIPTION DIN TERMINAL BLOCK 4MM (PACK OF 50) - BLACK
PRODUCT CODE 778-3714
DESCRIPTION DIN TERMINAL BLOCK 4MM (PACK OF 50) - RED
PRODUCT CODE 778-3814
DESCRIPTION DIN TERMINAL BLOCK 4MM (PACK OF 50) - WHITE
PRODUCT CODE 778-4405
DESCRIPTION 4 WAY ORANGE TERMINAL LINK (PACK OF 50)
PRODUCT CODE 778-9411
DESCRIPTION GREY TERMINAL END CAPS (PACK OF 20)
PRODUCT CODE 900-2001
DESCRIPTION IDENT PUSH IN MARKER SHEET 1
PRODUCT CODE 900-2002
DESCRIPTION IDENT PUSH IN MARKER SHEET 2
PRODUCT CODE 900-2003
DESCRIPTION IDENT PUSH IN MARKER SHEET 3
PRODUCT CODE AP-DIN
DESCRIPTION DIN RAIL ADAPTER PLATE

The AP-DIN is an adapter plate, designed to allow mounting of products which do not support DIN rail, within an LCP or other DIN rail enclosure. Popular examples of products that would require this product for mounting include Lutron I/O and DMX modules.

KIT CONTAINS:
  • 1 x Adapter Plate
  • 2 x DIN Rail Adapters
  • Fasteners
MORE INFO
PRODUCT CODE AP-DIN-IO
DESCRIPTION DIN Rail Adapter Plate for Lutron QSE-IO Logic controller

The AP-DIN-IO lets you mount Lutron’s QSE-IO Logic controller onto a DIN rail. The included landing board gives you extra COM ports and low voltage DC power so you can logically lay out and wire your remote sensors (eg. PIR or Daylight Sensor). Individual pluggable connectors help you quickly debug during deployment and enables the use of third-party sensors. The landing board is integrated into a recess on the AP-DIN-IO to fit neatly underneath our enclosure lids without the need for additional trim plates.

KIT CONTAINS:
  • 1 x Adapter Plate
  • 1 x Landing Board
  • 2 x DIN Rail Adapters
  • Fasteners
MORE INFO
PRODUCT CODE C4E-BP
DESCRIPTION C4E-BP DIN Rail Blanking Plate

The blanking plate is designed to block off one complete DIN module cut out on the front cover of an C4E enclosure. Perfect for when extra space has been specified for future expansion, the blanking plate secures from the rear ensuring a secure finish. The simple design allows for retrofit to any C4E unit without the need for extra holes.
MORE INFO
PRODUCT CODE C4E-TB20
DESCRIPTION 20 DIN RAIL TERMINAL BLOCKS & END RESTRAINTS

Pack of 20 terminal blocks for use with C4E enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 10 x Blue Terminal Blocks
  • 10 x Brown Terminal Blocks
  • 2 x End Stops
  • 6 x 4 Pole Jumper Bars
MORE INFO
PRODUCT CODE C4E-TB20-USA
DESCRIPTION US STYLE 20 DIN RAIL TERMINAL BLOCKS & END RESTRAINTS

Pack of 20 terminal blocks for use with C4E enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 10 x White Terminal Blocks
  • 10 x Black Terminal Blocks
  • 2 x End Stops
  • 6 x 4 Pole Jumper Bars
MORE INFO
PRODUCT CODE C4E-TB24
DESCRIPTION 24 DIN RAIL TERMINAL BLOCKS & END RESTRAINTS

Pack of 24 terminal blocks for use with C4E enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 12 x Blue Terminal Blocks
  • 12 x Brown Terminal Blocks
  • 2 x End Stops
  • 9 x 4 Pole Jumper Bars
MORE INFO
PRODUCT CODE C4E-TB24-USA
DESCRIPTION US STYLE 24 DIN RAIL TERMINAL BLOCKS & END RESTRAINTS

Pack of 24 terminal blocks for use with C4E enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 12 x Black Terminal Blocks
  • 12 x White Terminal Blocks
  • 2 x End Stops
  • 9 x 4 Pole Jumper Bars
MORE INFO
PRODUCT CODE DEB-DRK
DESCRIPTION DEB DIN RAIL KIT

The DEB DIN Rail Add-On Kit allows the mounting of DIN compatible modules alongside networking equipment inside a DEB enclosure. Neatly manage wiring using the included cable trunking that is pre-cut to span the width of the enclosure. The versatile layout of the DEB allows the installation of multiple DEB-DRK kits inside each enclosure, creating the ideal enclosure to suit any project.

KIT CONTAINS:
  • 1 x Purpose Cut Length of DIN Rail
  • 1 x Purpose Cut Length of Cable Trunking
  • Mounting Brackets & Hardware
MORE INFO
PRODUCT CODE EE-MMK
DESCRIPTION ELECTRICAL ENCLOSURE MODULE MOUNT KIT

A mounting kit to allow simple and easy mounting of surface mounted modules onto DIN rail within Future Automation electrical enclosures. Suitable for most modules including Lutron Processors, DMX and I/O modules.

KIT CONTAINS:
  • 2 x Rail Adapters
  • 2 x Washers
  • 2 x Fixing Screws
MORE INFO
PRODUCT CODE ENCLOSURE-HINGE-PINS
DESCRIPTION REPLACEMENT ENCLOSURE HINGE PINS (PAIR)
PRODUCT CODE ENCLOSURE-HINGE-SET
DESCRIPTION REPLACEMENT ENCLOSURE HINGE SET (PAIR)
PRODUCT CODE ENCLOSURE-LID-SCREWS
DESCRIPTION ENCLOSURE LID SCREWS X 50
PRODUCT CODE LCP-BP
DESCRIPTION LCP DIN Rail Blanking Plate

The blanking plate is designed to block off one complete full length DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra rails have been specified for future expansion, the blanking plate secures from the rear ensuring a secure finish.
MORE INFO
PRODUCT CODE LCP-DRB
DESCRIPTION LCP DIN RAIL BLANK (3 PACK)

Used to block individual sections of DIN rail, each blank is equivalent to one 1 DIN wide, attached directly to the DIN rail and protrudes through the front cover cut out to completely blank excess lengths of rail when the cover is in place.
MORE INFO
PRODUCT CODE LCP-LB5
DESCRIPTION Landing Board for 5 Connectors

The LCP-LB5 5 way landing board is a printed circuit board designed to allow the installer to terminate module connections inside an LCP enclosure, to simplify wiring. The landing board attaches to the inside of the LCP panel, using dedicated fixing points.
MORE INFO
PRODUCT CODE LCP-MTP1
DESCRIPTION Module Trim Plate - 9 DIN Cutout

The module trim plate is designed to block off partial lengths of DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra space has been specified for future expansion or when a rail is not fully used, the blanking plate attaches from the rear ensuring a secure finish.

LCP-MTP1 - Module Trim Plate - 9 DIN / 166mm (6.53") Cutout
MORE INFO
PRODUCT CODE LCP-MTP2
DESCRIPTION Module Trim Plate - 12 DIN Cutout

The module trim plate is designed to block off partial lengths of DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra space has been specified for future expansion or when a rail is not fully used, the blanking plate attaches from the rear ensuring a secure finish.

LCP-MTP2 - Module Trim Plate - 12 DIN / 220MM (8.66") Cutout
MORE INFO
PRODUCT CODE LCP-MTP3
DESCRIPTION Module Trim Plate - 18 DIN Cutout

The module trim plate is designed to block off partial lengths of DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra space has been specified for future expansion or when a rail is not fully used, the blanking plate attaches from the rear ensuring a secure finish.

LCP-MTP3 - Module Trim Plate - 18 DIN / 328MM (12.91") Cutout
MORE INFO
PRODUCT CODE LCP-MTP4
DESCRIPTION Module Trim Plate - 21 DIN Cutout

The module trim plate is designed to block off partial lengths of DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra space has been specified for future expansion or when a rail is not fully used, the blanking plate attaches from the rear ensuring a secure finish.

LCP-MTP4 - Module Trim Plate - 21 DIN / 382MM (15.03") Cutout
MORE INFO
PRODUCT CODE LCP-PD-BP
DESCRIPTION LCP-PD DIN Rail Blanking Plate

The blanking plate is designed to block off one complete full length DIN rail cut out on the front cover of an LCP-PD enclosure. Perfect for when extra rails have been specified for future expansion, the blanking plate secures from the rear ensuring a secure finish. The simple design allows for retrofit to any LCP-PD unit without the need for extra holes.
MORE INFO
PRODUCT CODE LCP-TB10
DESCRIPTION 10 DIN Rail Terminal Blocks & End Restraints

Pack of 10 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 5 x Blue Terminal Blocks
  • 5 x Brown Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
PRODUCT CODE LCP-TB10-USA
DESCRIPTION 10 DIN Rail Terminal Blocks & End Restraints

Pack of 10 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 5 x Black Terminal Blocks
  • 5 x White Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
PRODUCT CODE LCP-TB16
DESCRIPTION 16 DIN Rail Terminal Blocks & End Restraints

Pack of 16 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 8 x Blue Terminal Blocks
  • 8 x Brown Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
PRODUCT CODE LCP-TB16-PH2
DESCRIPTION Phase 2 - 16 DIN Rail Terminal Blocks & End Restraints

Pack of 16 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 8 x Blue Terminal Blocks
  • 8 x Black Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
PRODUCT CODE LCP-TB16-PH3
DESCRIPTION Phase 3 - 16 DIN Rail Terminal Blocks & End Restraints

Pack of 16 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 8 x Blue Terminal Blocks
  • 8 x White Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
PRODUCT CODE LCP-TB16-USA
DESCRIPTION US Style 16 DIN Rail Terminal Blocks & End Restraints

Pack of 16 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 8 x White Terminal Blocks
  • 8 x Black Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
PRODUCT CODE LCP-TB8
DESCRIPTION 8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x Blue Terminal Blocks
  • 4 x Brown Terminal Blocks
  • 2 x End Stops
  • 2 x 4 Pole Jumper Bars
MORE INFO
PRODUCT CODE LCP-TB8-0-10V
DESCRIPTION 0-10V - 8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

Ideal for use with 0-10V control signals or audio speaker connections

KIT CONTAINS:
  • 4 x Red Terminal Blocks
  • 4 x Black Terminal Blocks
  • 2 x End Stops
  • 1 x 4 Pole Jumper Bar
MORE INFO
PRODUCT CODE LCP-TB8-PH2
DESCRIPTION Phase 2 - 8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x Blue Terminal Blocks
  • 4 x Black Terminal Blocks
  • 2 x End Stops
  • 2 x 4 Pole Jumper Bars
MORE INFO
PRODUCT CODE LCP-TB8-PH3
DESCRIPTION Phase 3 - 8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x Blue Terminal Blocks
  • 4 x White Terminal Blocks
  • 2 x End Stops
  • 2 x 4 Pole Jumper Bars
MORE INFO
PRODUCT CODE LCP-TB8-USA
DESCRIPTION US Style 8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x White Terminal Blocks
  • 4 x Black Terminal Blocks
  • 2 x End Stops
  • 2 x 4 Pole Jumper Bars
MORE INFO
PRODUCT CODE LCP-TB-DALI
DESCRIPTION TERMINAL BLOCKS FOR 1 DALI MODULE

Pack of 8 terminal blocks for use with LCP enclosures when installing a DALI module. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 2 x Grey Terminal Blocks
  • 2 x Black Terminal Blocks
  • 2 x Brown Terminal Blocks
  • 2 x Blue Terminal Blocks
  • 2 x End Stops
  • 2 x 2 Pole Jumper Bars
MORE INFO
PRODUCT CODE LCP-TB-MOTOR
DESCRIPTION TERMINAL BLOCKS FOR 1 MOTOR MODULE

Pack of 8 terminal blocks for use with LCP enclosures when installing a DALI module. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x Brown Terminal Blocks
  • 4 x Red Terminal Blocks
  • 4 x Blue Terminal Blocks
  • 2 x End Stops
  • 1 x 4 Pole Jumper Bars
MORE INFO
PRODUCT CODE LXN-MTP157
DESCRIPTION Module Trim Plate - 157mm Cutout
MORE INFO
PRODUCT CODE LXN-MTP228
DESCRIPTION Module Trim Plate - 228mm Cutout
MORE INFO
PRODUCT CODE LXN-MTP319
DESCRIPTION Module Trim Plate - 319mm Cutout
MORE INFO
PRODUCT CODE LXN-MTP371
DESCRIPTION Module Trim Plate - 371mm Cutout
MORE INFO
PRODUCT CODE RCBO-CK
DESCRIPTION RCBO Connection Kit (for up to 15 RCBOs)
PRODUCT CODE SWKIT-LCP4
DESCRIPTION Self Wiring Kit for LCP4

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP4
MORE INFO
PRODUCT CODE SWKIT-LCP5
DESCRIPTION Self Wiring Kit for LCP5

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP5
MORE INFO
PRODUCT CODE SWKIT-LCP6
DESCRIPTION Self Wiring Kit for LCP6

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP6
MORE INFO
PRODUCT CODE SWKIT-LCP7
DESCRIPTION Self Wiring Kit for LCP7

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP7
MORE INFO
PRODUCT CODE SWKIT-LCP8
DESCRIPTION Self Wiring Kit for LCP8

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP8
MORE INFO
PRODUCT CODE USJBS
DESCRIPTION BACKBOX FOR 1 GANG US KEYPAD (10 PACK)

The USJBS is a 1 gang backbox that has been designed to allow the installation of US style keypads within a brick wall. Shallower than a traditional US style backbox, the USJBS allows for an easier installation with less space required within the wall.
MORE INFO