Enclosure Accessories

Enclosure Wiring Parts

To enable installers to populate their own panels, we also supply a large range of wiring accessories including RCBO's, isolators, cabling and labelling kits.

These are the same high quality, branded components that we use to pre wire and fully wire out DIN Rail Enclosures in house.

See our Enclosures for details on all of our DIN Rail Enclosures.

  • High Quality, Branded Components
  • Cost Saving Over Sourcing Components Individually
  • Available From Stock
HOW TO PURCHASE DEALER LOGIN
PRODUCT DESCRIPTION
335-1001 RCBO Type C 10A
335-2002 ISOLATOR SWITCH 2 POLE 63A (SINGLE)
335-2102 ISOLATOR SWITCH 4 POLE 63A (SINGLE)
444-1125 TRI RATED CABLE 2.5MM (100M ROLL) - BLACK
444-2125 TRI RATED CABLE 2.5MM (100M ROLL) - BLUE
444-3125 TRI RATED CABLE 2.5MM (100M ROLL) - BROWN
444-7125 TRI RATED CABLE 2.5MM (100M ROLL) - WHITE
777-1201 2.5MM BOOTLACE FERRULE CRIMP (GREY) (PACK OF 500)
778-3001 TERMINAL END STOP (CLAMP) (PACK OF 2)
778-3005 TERMINAL BAR 26 HOLES (EARTH)
778-3006 TERMINAL BAR 20 HOLES (NEUTRAL)
778-3010 DIN TERMINAL BLOCK 4MM (PACK OF 20) - EARTH
778-3114 DIN TERMINAL BLOCK 4MM (PACK OF 50) - BROWN
778-3214 DIN TERMINAL BLOCK 4MM (PACK OF 50) - BLUE
778-3314 DIN TERMINAL BLOCK 4MM (PACK OF 50) - BLACK
778-3714 DIN TERMINAL BLOCK 4MM (PACK OF 50) - RED
778-3814 DIN TERMINAL BLOCK 4MM (PACK OF 50) - WHITE
778-4405 4 WAY ORANGE TERMINAL LINK (PACK OF 50)
778-9411 GREY TERMINAL END CAPS (PACK OF 20)
900-2001 IDENT PUSH IN MARKER SHEET 1
900-2002 IDENT PUSH IN MARKER SHEET 2
900-2003 IDENT PUSH IN MARKER SHEET 3
AP-DIN DIN RAIL ADAPTER PLATE

The AP-DIN is an adapter plate, designed to allow mounting of products which do not support DIN rail, within an LCP or other DIN rail enclosure. Popular examples of products that would require this product for mounting include Lutron I/O and DMX modules.

KIT CONTAINS:
  • 1 x Adapter Plate
  • 2 x DIN Rail Adapters
  • Fasteners
MORE INFO
C4E-BP C4E-BP DIN Rail Blanking Plate

The blanking plate is designed to block off one complete DIN module cut out on the front cover of an C4E enclosure. Perfect for when extra space has been specified for future expansion, the blanking plate secures from the rear ensuring a secure finish. The simple design allows for retrofit to any C4E unit without the need for extra holes.
MORE INFO
C4E-TB20 20 DIN RAIL TERMINAL BLOCKS & END RESTRAINTS

Pack of 20 terminal blocks for use with C4E enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 10 x Blue Terminal Blocks
  • 10 x Brown Terminal Blocks
  • 2 x End Stops
  • 6 x 4 Pole Jumper Bars
MORE INFO
C4E-TB20-USA US STYLE 20 DIN RAIL TERMINAL BLOCKS & END RESTRAINTS

Pack of 20 terminal blocks for use with C4E enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 10 x White Terminal Blocks
  • 10 x Black Terminal Blocks
  • 2 x End Stops
  • 6 x 4 Pole Jumper Bars
MORE INFO
C4E-TB24 24 DIN RAIL TERMINAL BLOCKS & END RESTRAINTS

Pack of 24 terminal blocks for use with C4E enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 12 x Blue Terminal Blocks
  • 12 x Brown Terminal Blocks
  • 2 x End Stops
  • 9 x 4 Pole Jumper Bars
MORE INFO
C4E-TB24-USA US STYLE 24 DIN RAIL TERMINAL BLOCKS & END RESTRAINTS

Pack of 24 terminal blocks for use with C4E enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 12 x Black Terminal Blocks
  • 12 x White Terminal Blocks
  • 2 x End Stops
  • 9 x 4 Pole Jumper Bars
MORE INFO
DEB-DRK DEB DIN RAIL KIT

The DEB DIN Rail Add-On Kit allows the mounting of DIN compatible modules alongside networking equipment inside a DEB enclosure. Neatly manage wiring using the included cable trunking that is pre-cut to span the width of the enclosure. The versatile layout of the DEB allows the installation of multiple DEB-DRK kits inside each enclosure, creating the ideal enclosure to suit any project.

KIT CONTAINS:
  • 1 x Purpose Cut Length of DIN Rail
  • 1 x Purpose Cut Length of Cable Trunking
  • Mounting Brackets & Hardware
MORE INFO
EE-MMK ELECTRICAL ENCLOSURE MODULE MOUNT KIT

A mounting kit to allow simple and easy mounting of surface mounted modules onto DIN rail within Future Automation electrical enclosures. Suitable for most modules including Lutron Processors, DMX and I/O modules.

KIT CONTAINS:
  • 2 x Rail Adapters
  • 2 x Washers
  • 2 x Fixing Screws
MORE INFO
ENCLOSURE-HINGE-SET REPLACEMENT ENCLOSURE HINGE SET (PAIR)
ENCLOSURE-LID-SCREWS ENCLOSURE LID SCREWS X 50
LCP-BP LCP DIN Rail Blanking Plate

The blanking plate is designed to block off one complete full length DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra rails have been specified for future expansion, the blanking plate secures from the rear ensuring a secure finish.
MORE INFO
LCP-DRB LCP DIN RAIL BLANK (3 PACK)

Used to block individual sections of DIN rail, each blank is equivalent to one 1 DIN wide, attached directly to the DIN rail and protrudes through the front cover cut out to completely blank excess lengths of rail when the cover is in place.
MORE INFO
LCP-LB5 Landing Board for 5 Connectors

The LCP-LB5 5 way landing board is a printed circuit board designed to allow the installer to terminate module connections inside an LCP enclosure, to simplify wiring. The landing board attaches to the inside of the LCP panel, using dedicated fixing points.
MORE INFO
LCP-MTP1 Module Trim Plate - 9 DIN Cutout

The module trim plate is designed to block off partial lengths of DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra space has been specified for future expansion or when a rail is not fully used, the blanking plate attaches from the rear ensuring a secure finish.

LCP-MTP1 - Module Trim Plate - 9 DIN / 166mm (6.53") Cutout
MORE INFO
LCP-MTP2 Module Trim Plate - 12 DIN Cutout

The module trim plate is designed to block off partial lengths of DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra space has been specified for future expansion or when a rail is not fully used, the blanking plate attaches from the rear ensuring a secure finish.

LCP-MTP2 - Module Trim Plate - 12 DIN / 220MM (8.66") Cutout
MORE INFO
LCP-MTP3 Module Trim Plate - 18 DIN Cutout

The module trim plate is designed to block off partial lengths of DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra space has been specified for future expansion or when a rail is not fully used, the blanking plate attaches from the rear ensuring a secure finish.

LCP-MTP3 - Module Trim Plate - 18 DIN / 328MM (12.91") Cutout
MORE INFO
LCP-MTP4 Module Trim Plate - 21 DIN Cutout

The module trim plate is designed to block off partial lengths of DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra space has been specified for future expansion or when a rail is not fully used, the blanking plate attaches from the rear ensuring a secure finish.

LCP-MTP4 - Module Trim Plate - 21 DIN / 382MM (15.03") Cutout
MORE INFO
LCP-PD-BP LCP-PD DIN Rail Blanking Plate

The blanking plate is designed to block off one complete full length DIN rail cut out on the front cover of an LCP-PD enclosure. Perfect for when extra rails have been specified for future expansion, the blanking plate secures from the rear ensuring a secure finish. The simple design allows for retrofit to any LCP-PD unit without the need for extra holes.
MORE INFO
LCP-TB10 10 DIN Rail Terminal Blocks & End Restraints

Pack of 10 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 5 x Blue Terminal Blocks
  • 5 x Brown Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
LCP-TB10-USA 10 DIN Rail Terminal Blocks & End Restraints

Pack of 10 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 5 x Black Terminal Blocks
  • 5 x White Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
LCP-TB16 16 DIN Rail Terminal Blocks & End Restraints

Pack of 16 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 8 x Blue Terminal Blocks
  • 8 x Brown Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
LCP-TB16-PH2 Phase 2 - 16 DIN Rail Terminal Blocks & End Restraints

Pack of 16 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 8 x Blue Terminal Blocks
  • 8 x Black Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
LCP-TB16-PH3 Phase 3 - 16 DIN Rail Terminal Blocks & End Restraints

Pack of 16 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 8 x Blue Terminal Blocks
  • 8 x White Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
LCP-TB16-USA US Style 16 DIN Rail Terminal Blocks & End Restraints

Pack of 16 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 8 x White Terminal Blocks
  • 8 x Black Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
LCP-TB8 8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x Blue Terminal Blocks
  • 4 x Brown Terminal Blocks
  • 2 x End Stops
  • 2 x 4 Pole Jumper Bars
MORE INFO
LCP-TB8-PH2 Phase 2 - 8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x Blue Terminal Blocks
  • 4 x Black Terminal Blocks
  • 2 x End Stops
  • 2 x 4 Pole Jumper Bars
MORE INFO
LCP-TB8-PH3 Phase 3 - 8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x Blue Terminal Blocks
  • 4 x White Terminal Blocks
  • 2 x End Stops
  • 2 x 4 Pole Jumper Bars
MORE INFO
LCP-TB8-USA US Style 8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x White Terminal Blocks
  • 4 x Black Terminal Blocks
  • 2 x End Stops
  • 2 x 4 Pole Jumper Bars
MORE INFO
LCP-TB-DALI TERMINAL BLOCKS FOR 1 DALI MODULE

Pack of 8 terminal blocks for use with LCP enclosures when installing a DALI module. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 2 x Grey Terminal Blocks
  • 2 x Black Terminal Blocks
  • 2 x Brown Terminal Blocks
  • 2 x Blue Terminal Blocks
  • 2 x End Stops
  • 2 x 2 Pole Jumper Bars
MORE INFO
LCP-TB-MOTOR TERMINAL BLOCKS FOR 1 MOTOR MODULE

Pack of 8 terminal blocks for use with LCP enclosures when installing a DALI module. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x Brown Terminal Blocks
  • 4 x Red Terminal Blocks
  • 4 x Blue Terminal Blocks
  • 2 x End Stops
  • 1 x 4 Pole Jumper Bars
MORE INFO
RCBO-CK RCBO Connection Kit (for up to 15 RCBOs)
SWKIT-LCP4 Self Wiring Kit for LCP4

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP4
MORE INFO
SWKIT-LCP5 Self Wiring Kit for LCP5

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP5
MORE INFO
SWKIT-LCP6 Self Wiring Kit for LCP6

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP6
MORE INFO
SWKIT-LCP7 Self Wiring Kit for LCP7

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP7
MORE INFO
SWKIT-LCP8 Self Wiring Kit for LCP8

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP8
MORE INFO
USJBS BACKBOX FOR 1 GANG US KEYPAD (10 PACK)

The USJBS is a 1 gang backbox that has been designed to allow the installation of US style keypads within a brick wall. Shallower than a traditional US style backbox, the USJBS allows for an easier installation with less space required within the wall.
MORE INFO
335-1001
RCBO Type C 10A
335-2002
ISOLATOR SWITCH 2 POLE 63A (SINGLE)
335-2102
ISOLATOR SWITCH 4 POLE 63A (SINGLE)
444-1125
TRI RATED CABLE 2.5MM (100M ROLL) - BLACK
444-2125
TRI RATED CABLE 2.5MM (100M ROLL) - BLUE
444-3125
TRI RATED CABLE 2.5MM (100M ROLL) - BROWN
444-7125
TRI RATED CABLE 2.5MM (100M ROLL) - WHITE
777-1201
2.5MM BOOTLACE FERRULE CRIMP (GREY) (PACK OF 500)
778-3001
TERMINAL END STOP (CLAMP) (PACK OF 2)
778-3005
TERMINAL BAR 26 HOLES (EARTH)
778-3006
TERMINAL BAR 20 HOLES (NEUTRAL)
778-3010
DIN TERMINAL BLOCK 4MM (PACK OF 20) - EARTH
778-3114
DIN TERMINAL BLOCK 4MM (PACK OF 50) - BROWN
778-3214
DIN TERMINAL BLOCK 4MM (PACK OF 50) - BLUE
778-3314
DIN TERMINAL BLOCK 4MM (PACK OF 50) - BLACK
778-3714
DIN TERMINAL BLOCK 4MM (PACK OF 50) - RED
778-3814
DIN TERMINAL BLOCK 4MM (PACK OF 50) - WHITE
778-4405
4 WAY ORANGE TERMINAL LINK (PACK OF 50)
778-9411
GREY TERMINAL END CAPS (PACK OF 20)
900-2001
IDENT PUSH IN MARKER SHEET 1
900-2002
IDENT PUSH IN MARKER SHEET 2
900-2003
IDENT PUSH IN MARKER SHEET 3
AP-DIN
DIN RAIL ADAPTER PLATE

The AP-DIN is an adapter plate, designed to allow mounting of products which do not support DIN rail, within an LCP or other DIN rail enclosure. Popular examples of products that would require this product for mounting include Lutron I/O and DMX modules.

KIT CONTAINS:
  • 1 x Adapter Plate
  • 2 x DIN Rail Adapters
  • Fasteners
MORE INFO
C4E-BP
C4E-BP DIN Rail Blanking Plate

The blanking plate is designed to block off one complete DIN module cut out on the front cover of an C4E enclosure. Perfect for when extra space has been specified for future expansion, the blanking plate secures from the rear ensuring a secure finish. The simple design allows for retrofit to any C4E unit without the need for extra holes.
MORE INFO
C4E-TB20
20 DIN RAIL TERMINAL BLOCKS & END RESTRAINTS

Pack of 20 terminal blocks for use with C4E enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 10 x Blue Terminal Blocks
  • 10 x Brown Terminal Blocks
  • 2 x End Stops
  • 6 x 4 Pole Jumper Bars
MORE INFO
C4E-TB20-USA
US STYLE 20 DIN RAIL TERMINAL BLOCKS & END RESTRAINTS

Pack of 20 terminal blocks for use with C4E enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 10 x White Terminal Blocks
  • 10 x Black Terminal Blocks
  • 2 x End Stops
  • 6 x 4 Pole Jumper Bars
MORE INFO
C4E-TB24
24 DIN RAIL TERMINAL BLOCKS & END RESTRAINTS

Pack of 24 terminal blocks for use with C4E enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 12 x Blue Terminal Blocks
  • 12 x Brown Terminal Blocks
  • 2 x End Stops
  • 9 x 4 Pole Jumper Bars
MORE INFO
C4E-TB24-USA
US STYLE 24 DIN RAIL TERMINAL BLOCKS & END RESTRAINTS

Pack of 24 terminal blocks for use with C4E enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 12 x Black Terminal Blocks
  • 12 x White Terminal Blocks
  • 2 x End Stops
  • 9 x 4 Pole Jumper Bars
MORE INFO
DEB-DRK
DEB DIN RAIL KIT

The DEB DIN Rail Add-On Kit allows the mounting of DIN compatible modules alongside networking equipment inside a DEB enclosure. Neatly manage wiring using the included cable trunking that is pre-cut to span the width of the enclosure. The versatile layout of the DEB allows the installation of multiple DEB-DRK kits inside each enclosure, creating the ideal enclosure to suit any project.

KIT CONTAINS:
  • 1 x Purpose Cut Length of DIN Rail
  • 1 x Purpose Cut Length of Cable Trunking
  • Mounting Brackets & Hardware
MORE INFO
EE-MMK
ELECTRICAL ENCLOSURE MODULE MOUNT KIT

A mounting kit to allow simple and easy mounting of surface mounted modules onto DIN rail within Future Automation electrical enclosures. Suitable for most modules including Lutron Processors, DMX and I/O modules.

KIT CONTAINS:
  • 2 x Rail Adapters
  • 2 x Washers
  • 2 x Fixing Screws
MORE INFO
ENCLOSURE-HINGE-SET
REPLACEMENT ENCLOSURE HINGE SET (PAIR)
ENCLOSURE-LID-SCREWS
ENCLOSURE LID SCREWS X 50
LCP-BP
LCP DIN Rail Blanking Plate

The blanking plate is designed to block off one complete full length DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra rails have been specified for future expansion, the blanking plate secures from the rear ensuring a secure finish.
MORE INFO
LCP-DRB
LCP DIN RAIL BLANK (3 PACK)

Used to block individual sections of DIN rail, each blank is equivalent to one 1 DIN wide, attached directly to the DIN rail and protrudes through the front cover cut out to completely blank excess lengths of rail when the cover is in place.
MORE INFO
LCP-LB5
Landing Board for 5 Connectors

The LCP-LB5 5 way landing board is a printed circuit board designed to allow the installer to terminate module connections inside an LCP enclosure, to simplify wiring. The landing board attaches to the inside of the LCP panel, using dedicated fixing points.
MORE INFO
LCP-MTP1
Module Trim Plate - 9 DIN Cutout

The module trim plate is designed to block off partial lengths of DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra space has been specified for future expansion or when a rail is not fully used, the blanking plate attaches from the rear ensuring a secure finish.

LCP-MTP1 - Module Trim Plate - 9 DIN / 166mm (6.53") Cutout
MORE INFO
LCP-MTP2
Module Trim Plate - 12 DIN Cutout

The module trim plate is designed to block off partial lengths of DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra space has been specified for future expansion or when a rail is not fully used, the blanking plate attaches from the rear ensuring a secure finish.

LCP-MTP2 - Module Trim Plate - 12 DIN / 220MM (8.66") Cutout
MORE INFO
LCP-MTP3
Module Trim Plate - 18 DIN Cutout

The module trim plate is designed to block off partial lengths of DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra space has been specified for future expansion or when a rail is not fully used, the blanking plate attaches from the rear ensuring a secure finish.

LCP-MTP3 - Module Trim Plate - 18 DIN / 328MM (12.91") Cutout
MORE INFO
LCP-MTP4
Module Trim Plate - 21 DIN Cutout

The module trim plate is designed to block off partial lengths of DIN rail cut out on the front cover of an LCP enclosure. Perfect for when extra space has been specified for future expansion or when a rail is not fully used, the blanking plate attaches from the rear ensuring a secure finish.

LCP-MTP4 - Module Trim Plate - 21 DIN / 382MM (15.03") Cutout
MORE INFO
LCP-PD-BP
LCP-PD DIN Rail Blanking Plate

The blanking plate is designed to block off one complete full length DIN rail cut out on the front cover of an LCP-PD enclosure. Perfect for when extra rails have been specified for future expansion, the blanking plate secures from the rear ensuring a secure finish. The simple design allows for retrofit to any LCP-PD unit without the need for extra holes.
MORE INFO
LCP-TB10
10 DIN Rail Terminal Blocks & End Restraints

Pack of 10 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 5 x Blue Terminal Blocks
  • 5 x Brown Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
LCP-TB10-USA
10 DIN Rail Terminal Blocks & End Restraints

Pack of 10 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 5 x Black Terminal Blocks
  • 5 x White Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
LCP-TB16
16 DIN Rail Terminal Blocks & End Restraints

Pack of 16 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 8 x Blue Terminal Blocks
  • 8 x Brown Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
LCP-TB16-PH2
Phase 2 - 16 DIN Rail Terminal Blocks & End Restraints

Pack of 16 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 8 x Blue Terminal Blocks
  • 8 x Black Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
LCP-TB16-PH3
Phase 3 - 16 DIN Rail Terminal Blocks & End Restraints

Pack of 16 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 8 x Blue Terminal Blocks
  • 8 x White Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
LCP-TB16-USA
US Style 16 DIN Rail Terminal Blocks & End Restraints

Pack of 16 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 8 x White Terminal Blocks
  • 8 x Black Terminal Blocks
  • 2 x End Stops
  • 4 x 4 Pole Jumper Bars
MORE INFO
LCP-TB8
8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x Blue Terminal Blocks
  • 4 x Brown Terminal Blocks
  • 2 x End Stops
  • 2 x 4 Pole Jumper Bars
MORE INFO
LCP-TB8-PH2
Phase 2 - 8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x Blue Terminal Blocks
  • 4 x Black Terminal Blocks
  • 2 x End Stops
  • 2 x 4 Pole Jumper Bars
MORE INFO
LCP-TB8-PH3
Phase 3 - 8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x Blue Terminal Blocks
  • 4 x White Terminal Blocks
  • 2 x End Stops
  • 2 x 4 Pole Jumper Bars
MORE INFO
LCP-TB8-USA
US Style 8 DIN Rail Terminal Blocks & End Restraints

Pack of 8 terminal blocks for use with LCP enclosures. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x White Terminal Blocks
  • 4 x Black Terminal Blocks
  • 2 x End Stops
  • 2 x 4 Pole Jumper Bars
MORE INFO
LCP-TB-DALI
TERMINAL BLOCKS FOR 1 DALI MODULE

Pack of 8 terminal blocks for use with LCP enclosures when installing a DALI module. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 2 x Grey Terminal Blocks
  • 2 x Black Terminal Blocks
  • 2 x Brown Terminal Blocks
  • 2 x Blue Terminal Blocks
  • 2 x End Stops
  • 2 x 2 Pole Jumper Bars
MORE INFO
LCP-TB-MOTOR
TERMINAL BLOCKS FOR 1 MOTOR MODULE

Pack of 8 terminal blocks for use with LCP enclosures when installing a DALI module. These terminal blocks are designed to mount onto the DIN rail and have a slim profile to maximise the amount of space used on the DIN rail.

KIT CONTAINS:
  • 4 x Brown Terminal Blocks
  • 4 x Red Terminal Blocks
  • 4 x Blue Terminal Blocks
  • 2 x End Stops
  • 1 x 4 Pole Jumper Bars
MORE INFO
RCBO-CK
RCBO Connection Kit (for up to 15 RCBOs)
SWKIT-LCP4
Self Wiring Kit for LCP4

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP4
MORE INFO
SWKIT-LCP5
Self Wiring Kit for LCP5

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP5
MORE INFO
SWKIT-LCP6
Self Wiring Kit for LCP6

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP6
MORE INFO
SWKIT-LCP7
Self Wiring Kit for LCP7

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP7
MORE INFO
SWKIT-LCP8
Self Wiring Kit for LCP8

The Future Automation Lighting Enclosure Self Wiring Kits are a pre bundled kit, designed to save installers both time and money when it comes to wiring Future Automation DIN rail enclosures.

Designed for an LCP8
MORE INFO
USJBS
BACKBOX FOR 1 GANG US KEYPAD (10 PACK)

The USJBS is a 1 gang backbox that has been designed to allow the installation of US style keypads within a brick wall. Shallower than a traditional US style backbox, the USJBS allows for an easier installation with less space required within the wall.
MORE INFO